Canonical numerical parameters, symbols, and units for _The Physics of Golf_ (ch01–ch32 plus ch09b and ch30b) and _The Geometry of Motion_ (Volume 0, Volume I, Volume II). Values align with NOTATION.md and the pinned UpstreamDrift shared constants unless a row states a separate teaching default.

| Parameter | Symbol | Unit | Definition | Value | Source | Rule / Standard | Chapters | UpstreamDrift |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Golf ball mass (regulation maximum) | $m_b$ | kg | Mass of a conforming golf ball; equipment rules specify an upper limit, not a single manufacturing target. | 0.04593 | USGA Rules of Golf, Equipment Rules, Rule 5-1 (mass not greater than 1.620 oz / 45.93 g) | USGA/R&A Equipment Rules | PoG ch28 (impact), articles/impact-mechanics-and-ball-flight | `src/shared/python/core/physics_constants.py` (`GOLF_BALL_MASS_KG`); `src/shared/python/impact_parameters/ball_impact.py` (`BALL_MASS_KG`) |
| Golf ball radius (regulation minimum) | $R_b$ | m | Radius corresponding to the minimum allowed ball diameter (42.67 mm). | 0.021335 | USGA Rules of Golf, Equipment Rules, Rule 5-2 (diameter not less than 1.680 in / 42.67 mm) | USGA/R&A Equipment Rules | PoG ch28, articles/impact-mechanics-and-ball-flight | `src/shared/python/core/physics_constants.py` (`GOLF_BALL_RADIUS_M`); `src/shared/python/model_appearance/ball.py` (`BALL_RADIUS_M`) |
| Golf ball moment of inertia (illustrative solid-sphere teaching value) | $I_b$ | kg·m² | Illustrative principal moment used in planar flight-integration examples; not a measured ball-specific inertia tensor entry. | 8.10×10⁻⁶ | AffineDrift articles/impact-mechanics-and-ball-flight.qmd worked example; tests/test_impact_aerodynamics_rigor.py | Teaching default | articles/impact-mechanics-and-ball-flight | — |
| Standard gravitational acceleration | $g$ | m/s² | Magnitude of gravitational acceleration at Earth's surface in SI teaching models. | 9.80665 | NIST CODATA (standard gravity); see also src.core.constants.GRAVITY_M_S2 in UpstreamDrift | SI / CODATA | PoG ch01–ch32, GoM Volume 0–II | `src/shared/python/core/physics_constants.py` (`GRAVITY_M_S2`) |
| Air density (sea level, ISA) | $ρ$ | kg/m³ | Reference air density for sea-level, 15 °C international standard atmosphere calculations. | 1.225 | International Standard Atmosphere; UpstreamDrift AIR_DENSITY_SEA_LEVEL_KG_M3 | ISA | PoG ch19 (aerodynamic drag), PoG ch31 (launch) | `src/shared/python/core/physics_constants.py` (`AIR_DENSITY_SEA_LEVEL_KG_M3`) |
| Air density (illustrative still air) | $ρ$ | kg/m³ | Rounded teaching value for still-air flight examples when a full atmosphere model is not carried. | 1.2 | AffineDrift articles/impact-mechanics-and-ball-flight.qmd worked example (declared illustrative) | Teaching default (not ISA) | articles/impact-mechanics-and-ball-flight | — |
| Driver coefficient of restitution (equipment limit) | $COR$ | — | Upper bound for driver clubhead coefficient of restitution under USGA/R&A spring-effect rules; not a typical measured value for all clubs. | 0.83 | USGA/R&A clubhead COR (CT) limit; UpstreamDrift DRIVER_COR and impact_parameters.ball_impact.COR_LIMIT | USGA/R&A Equipment Rules | PoG ch28 (impact), PoG ch14 (complete swing), NOTATION.md (DgCR) | `src/shared/python/core/physics_constants.py` (`DRIVER_COR`); `src/shared/python/impact_parameters/ball_impact.py` (`COR_LIMIT`) |
| Normal COR (illustrative driver strike) | $e$ | — | Dimensionless normal restitution used in reduced planar impact fixtures below the equipment ceiling. | 0.78 | AffineDrift hybrid impact protocol (src/affine_control/impact_contact_fixtures.py); comparable to literature strike models cited in ch28 | Teaching fixture | PoG ch28, models/hybrid-impact-contact | — |
| Drag–curve ratio | $DgCR$ | — | Restitution-based ratio (1 − COR)/(1 + COR); distinct from the Drift–Control Ratio (DCR). | (1 − COR)/(1 + COR) | NOTATION.md DgCR definition | Project notation | NOTATION.md, PoG ch28 | — |
| Driver clubhead mass (typical) | $m_h$ | kg | Illustrative lumped driver head mass for impact and energy-budget examples. | 0.200 | Industry typical driver head mass; UpstreamDrift GOLF_CLUBHEAD_MASS_KG | Teaching / industry typical | PoG ch04, PoG ch28, models/hybrid-impact-contact | `src/shared/python/core/physics_constants.py` (`GOLF_CLUBHEAD_MASS_KG`) |
| Driver clubhead MOI (about CG, typical) | $I_h$ | kg·m² | Typical moment of inertia of a driver head about its center of gravity, perpendicular to the face. | 4.5×10⁻⁴ | UpstreamDrift physics_constants.DRIVER_MOI_KG_M2 (typical driver specification) | Industry typical | PoG ch28, PoG ch31 | `src/shared/python/core/physics_constants.py` (`DRIVER_MOI_KG_M2`) |
| Driver length (regulation maximum) | $L$ | m | Maximum allowed driver length (46 in) converted to metres. | 1.1684 | USGA Rule 1-1c; UpstreamDrift DRIVER_LENGTH_MAX_M | USGA/R&A Equipment Rules | PoG ch02, PoG ch11 (flexible shaft) | `src/shared/python/core/physics_constants.py` (`DRIVER_LENGTH_MAX_M`) |
| Exponential spin decay rate (Rust / MacDonald–Hanzely) | $k$ | s⁻¹ | Spin decay coefficient in dω/dt = −kω used by the Rust trajectory kernel and several registered flight models. | 0.05 | UpstreamDrift physics_constants.SPIN_DECAY_RATE_S (provenance string cites Trackman Data) | Engineering default (verify against launch-monitor exports) | articles/upstreamdrift-physics-models, articles/impact-mechanics-and-ball-flight | `src/shared/python/core/physics_constants.py` (`SPIN_DECAY_RATE_S`) |
| Hole radius (USGA) | $R_h$ | m | Radius of a regulation hole (4.25 in diameter). | 0.054 | USGA hole diameter; UpstreamDrift putting_dynamics.solver.HOLE_RADIUS_M | USGA | articles/putting-roll-models, articles/green-simulation, articles/upstreamdrift-physics-models | `src/shared/python/putting_dynamics/solver.py` (`HOLE_RADIUS_M`) |
| Stimpmeter release speed (calibration) | $v_{\mathrm{release}}$ | m/s | Release speed used in the Stimp-to-rolling-resistance inversion (not necessarily the flat-ramp closed form). | 1.83 | USGA stimpmeter convention restated in UpstreamDrift putting_dynamics/friction.py | USGA convention | articles/putting-roll-models, articles/upstreamdrift-physics-models | `src/shared/python/putting_dynamics/friction.py` (`STIMP_RELEASE_SPEED_MPS`) |
| Green sliding friction (default) | $\mu_{\mathrm{slide}}$ | — | Kinetic Coulomb coefficient for the putting skid phase in UpstreamDrift putting_dynamics. | 0.40 | UpstreamDrift putting_dynamics/friction.DEFAULT_SLIDING_MU | Engineering default | articles/green-simulation, articles/upstreamdrift-physics-models | `src/shared/python/putting_dynamics/friction.py` (`DEFAULT_SLIDING_MU`) |
| Static rolling hold (default) | $\mu_{\mathrm{static}}$ | — | Maximum slope magnitude a resting ball can hold before re-starting roll. | 0.08 | UpstreamDrift putting_dynamics/friction.DEFAULT_STATIC_MU | Engineering default | articles/green-simulation, articles/upstreamdrift-physics-models | `src/shared/python/putting_dynamics/friction.py` (`DEFAULT_STATIC_MU`) |
| Green contact restitution (default) | $e_g$ | — | Normal restitution applied on airborne hop contacts with the green surface. | 0.78 | UpstreamDrift physics_constants.GREEN_RESTITUTION (uncited engineering default) | Engineering placeholder | articles/upstreamdrift-physics-models | `src/shared/python/core/physics_constants.py` (`GREEN_RESTITUTION`) |
| Typical club–ball contact duration | $t_c$ | s | Representative impact duration for driver strikes in high-speed video studies. | 0.0005 | UpstreamDrift physics_constants.TYPICAL_CONTACT_DURATION_S | Literature typical | PoG ch28, articles/upstreamdrift-physics-models | `src/shared/python/core/physics_constants.py` (`TYPICAL_CONTACT_DURATION_S`) |
| Air dynamic viscosity (15 °C) | $\mu$ | Pa·s | Dynamic viscosity of air at 15 °C used for Reynolds-number aerodynamics. | 1.789×10⁻⁵ | ISO 2533; UpstreamDrift AIR_VISCOSITY_KG_M_S | ISA | articles/impact-mechanics-and-ball-flight, articles/upstreamdrift-physics-models | `src/shared/python/core/physics_constants.py` (`AIR_VISCOSITY_KG_M_S`) |
| Clubhead center-of-gravity offset | $r_{CoG}$ | m | Position of the clubhead center of mass relative to the face-centre contact point along the face normal (negative toward the hosel/heel unless a chapter states otherwise). | 0.01–0.05 | Typical driver CG locations relative to face center in equipment catalogs; declare the datum in each derivation | Engineering convention (face-centre datum) | PoG ch04 (forces and torques), GoM Volume I | — |

## Usage

- **Consistency**: Numerical examples must match these symbols, units, and sourced values unless a chapter explicitly declares a rounded teaching default listed in `data/canonical_parameters.json`.
- **Provenance**: UpstreamDrift paths name shared constants in `D-sorganization/UpstreamDrift` at the fleet pin reviewed for the 2026-11-10 technical review.
- **Checks**: `scripts/check_parameters.py` regenerates this table and flags literals that contradict the registry (with baseline allowances).
